Page 1
USER MANUAL Universal 4 channels multifrequency transmitter (433,92 MHz to 868,80 MHz) For the latest instructions visit our website at www.abtecno.com rev. 05/2017...
4 key 2 key 3 EGO32 Seed code (hidden button) Press and hold key 3, then press and hold key 4. The red led will light steady. Release both keys and press the key which source code is needed.
2) Press the key on which you want to store the new code a number of times equal to N value indi- cated in the tables below. The led blinks 3 times for confirmation. In order to generate another code on a different channel please repeat step 2 within 3 seconds EGO32 PRODUCER N PRODUCER...
FIXED CODE TRANSMITTERS COMPATIBILITY TABLES (EGO / EGO32) MA R C A / B R A N D F R E Q U E N Z A MO D E L L O F O T O MA R C A / B R A N D F R E Q U E N Z A MO D E L L O...
Page 6
MA R C A / B R A N D F R E Q U E N Z A MO D E L L O F O T O MA R C A / B R A N D F R E Q U E N Z A MO D E L L O F O T O C A S I T B F T...
Page 7
MA R C A / B R A N D F R E Q U E N Z A MO D E L L O F O T O MARCA/BRAND FREQUENZA MODELLO FOTO DITEC 433.920 GOL4C D a s p i Z e r o 2 , Z e r o 2 C L O , D A S P I 4 3 3 .
Page 8
MA R C A / B R A N D F R E Q U E N Z A MO D E L L O F O T O MA R C A / B R A N D F R E Q U E N Z A MO D E L L O F O T O T M1 8 6 8 D S , T M2 8 6 8 D S , E l d a t R T 2 0 - 5 0 0 4 M- 0 1 ,...
Page 9
MA R C A / B R A N D F R E Q U E N Z A MO D E L L O F O T O MA R C A / B R A N D F R E Q U E N Z A MO D E L L O F O T O H O R MA N N 3 0 0 .
Page 10
MA R C A / B R A N D F R E Q U E N Z A MO D E L L O F O T O MA R C A / B R A N D F R E Q U E N Z A MO D E L L O F O T O P R O T E C O 4 3 3 .
Page 11
MA R C A / B R A N D F R E Q U E N Z A MO D E L L O F O T O MA R C A / B R A N D F R E Q U E N Z A MO D E L L O F O T O B e E a s y T X , B e E a s y S T A G N O L I...
Page 12
MA R C A / B R A N D F R E Q U E N Z A MO D E L L O F O T O MA R C A / B R A N D F R E Q U E N Z A MO D E L L O F O T O 4 3 3 .
PROCEDURE TO STORE A ROLLING CODE TRANSMITTER - GROUP 1 Compatibility table Compatibility table EGO32 ROLLING CODE GROUP 1 ROLLING CODE GROUP 1 PRODUCER MODEL PRODUCER MODEL LIFTMASTER 433 TX2 color 94335E, 84335EML, 94335E-old TE 4433H blue, Bravo TE 4433H,...
Page 14
3) Program EGO Press and hold key 1 and 2 for about 2/3 seconds and release: led on original transmitter will blink. Transmit seed code keeping the original transmitter about 5cm far from EGO (pic. E) pressing the key (channel) you intend to store into EGO. When the code is detected EGO red led goes off and green led will start to blink, at this point you can release the key.
If the procedure fails because the original transmitter is not compatible, after 10 seconds both led will start to blink alternately. PROCEDURE TO STORE A ROLLING CODE TRANSMITTER GROUP 2 (FAAC and GENIUS) Compatibility table ROLLING CODE GROUP 2 PRODUCER MODEL FAAC DL2 868 SLH, DL4 868 SLH, T2, T4, TML2 SLH, TML4, SLH, XT2 SLH, XT4 SLH...
Page 16
IMMEDIATELY after press and hold again the original transmitter’s key until EGO green led goes off, finally to confirm the success of the procedure the red led will blink for about 3 seconds. If you want to add another code on a different channel please goes back to step 2 within 3 seconds (until the.green led blinks rapidly).
PROCEDURE TO STORE A ROLLING CODE TRANSMITTER GROUP 2 (BFT) Compatibility table ROLLING CODE GROUP 2 (BFT) PRODUCER MODEL KLEIO TX2, KLEIO TX4, MITTO 2, MITTO 4, RB, RCB2, RCB4, TRC2, TRC4, TX2, TX4 1) Enter set up Press and hold key 4 (PROG) then press key sequence 1,2 (pic. A). Green led will start to blink rapidly (pic.
Page 18
3 sec >>> 4) Add EGO to the receiver At this point EGO is an emulator of the original transmitter and must be added into the receiver. Get closer to the receiver and: a) Press and hold key2, then press and hold key 4 (pic. G) until the red led lights steady, then release both (pic.
PROCEDURE TO STORE A ROLLING CODE TRANSMITTER GROUP NICE Compatibility table EGO32 ROLLING CODE GROUP NICE PRODUCER MODEL NICE FLO2R, FLO4R, VERY VR, ERA-INTI2, ERA-ONE2, ERA-ONE4 Required: an original and working NICE transmitter. 1) Enter set up Press and hold key 2 and 3 for at least 3 seconds until the green led starts to blink faster, then re- lease (pic.
PROCEDURE TO STORE A ROLLING CODE TRANSMITTER GROUP PRASTEL Compatibility table EGO32 ROLLING CODE GROUP PRASTEL PRODUCER MODEL PRASTEL TC4E, BFOR, MPSTL1E, MPSTL2E, MPSTL4E, MPSTP2E, MPSTP2 1) Enter set up Press and hold key 2 and 3 for at least 3 seconds until the green led starts to blink faster, then rele- ase (pic.
PROCEDURE TO STORE A ROLLING CODE TRANSMITTER GROUP DITEC Compatibility table EGO32 ROLLING CODE GROUP DITEC PRODUCER MODEL DITEC GOL4, BXLG4, BXLP2, BXLS2 1) Enter set up Press and hold key 2 and 3 for at least 3 seconds until the green led starts to blink faster, then rele- ase (pic.
PROCEDURE TO STORE A ROLLING CODE TRANSMITTER GROUP 3 Compatibility table Compatibility table EGO32 ROLLING CODE GROUP 3 ROLLING CODE GROUP 3 PRODUCER MODEL PRODUCER MODEL CARDIN TELCOMA FM S449QZ, S437TX FM402, FM402E, FM404E SOMMER / 4013, 4013TX, 4014, 4020, 4022TX,...
Page 23
3 sec >>> >>> >>> pic. F FLASH 4) Procedure of STORAGE IN THE RECEIVER The storage of the Sommer and Aperto models on the receiver can only be manually done by following the instructions of the same. For the storage of the Cardin models, get close to the gate and: a) Press and hold the key 2, then immediately press and hold the key 4 (see illustration G), the red led turns on, release both the keys (see illustration H).
PROCEDURE TO STORE A FIXED CODE TRANSMITTER (See the Compatibility Tables pages 5÷12) 1) Enter set up Press and hold key 4 (PROG) then press key sequence 1,2 (pic. A). Green led will start to blink rapidly (pic. B). pic. A pic.
The battery is not included in the warranty. DECLARATION OF CONFORMITY The product EGO/EGO32 is in conformity with the relevant Union harmonisation legislation: 1999/5/EC on radio equipment and telecommunications terminal equipment and the mutual rec- ognition of their conformity 1999/519/EC on the limitation of exposure of the general public to electromagnetic fields.
Procedure to store a rolling code transmitter – group DITEC page 21 Procedure to store a rolling code transmitter – group 3 page 22 Procedure to store a fixed code transmitter page 24 Technical features EGO - EGO32 General warnings Saftey rules page 25 Warranty Declaration of conformity All trademarks belong to their legitimate owners;...
Page 28
AB Tecno Srl Via Cicogna 95 40068 San Lazzaro di Savena (BO) Tel: +39 051 6259580 / fax: +39 051 6259600 info@abtecno.com www.abtecno.com EGO User manual...