Procedure To Store A Rolling Code Transmitter Group Ditec - Abexo EGO32 User Manual

PROCEDURE TO STORE A ROLLING CODE TRANSMITTER
Compatibility table
ROLLING CODE GROUP DITEC
PRODUCER
DITEC
1) Enter set up
Press and hold key 2 and 3 for at least 3 seconds until the green led starts to blink faster, then rele-
ase (pic. A).
2) Select channel
Press the key on which you want to store the new code 6 times. The led blinks 3 times for confirma-
tion (pic. B).
3) Procedure of storage in the receiver
Press and release the PRG button on the radio receiver: a "SIG" LED turns on (see illustration C). Press
and hold the transmitter's EGO button on which the code was previousy generated (see illustration D).
The "SIG" LED slowly flashes and then quickly for 10 seconds, then it turns off.
The EGO transmitter is stored on the receiver.
EGO User manual
EGO32
MODEL
GOL4, BXLG4, BXLP2, BXLS2
2
3 sec
3
6 times
PRG
SI G
GROUP DITEC
Slow
blinking
pic. C
>>>
>>>
Fast
blinking
FLASH
pic. B
3
x
pic. D
pic. A
21