Procedure To Store A Fixed Code Transmitter - Abexo EGO32 User Manual

Universal 4 channels multifrequency transmitter
Table of Contents

Advertisement

PROCEDURE TO STORE A FIXED CODE TRANSMITTER

1) Enter set up
Press and hold key 4 (PROG) then press key sequence 1,2 (pic. A). Green led will start to blink rapidly
(pic. B).
2) Select channel
Press the key (channel) on which you want to store the original transmitter (key 1 for channel 1, pic.
C), both led will be lit steady (pic. D).
3) Program EGO
Transmit keeping the original transmitter about 5cm far from EGO (pic. E).
When the frequency is detected, the red led goes off, then when the code is detected the green
led goes off too, finally to confirm the success of the procedure the red led will blink for about 3
seconds (pic.F).
If you want to add another code on a different channel please goes back to step 2 within 3 seconds
(until the.green led blinks rapidly).
pic. F
24
(See the Compatibility Tables pages 5÷12)
1
2
1
original
>>>
4
pic. A
pic. C
5cm
3 sec
>>>
pic. B
pic. D
pic. E
>>>
FLASH
3
x
EGO User manual

Advertisement

Table of Contents
loading

Related Products for Abexo EGO32

This manual is also suitable for:

Ego

Table of Contents