Table of Contents
Advertisement
PROCEDURE TO STORE A ROLLING CODE TRANSMITTER
Compatibility table
ROLLING CODE GROUP NICE
PRODUCER
NICE
Required: an original and working NICE transmitter.
1) Enter set up
Press and hold key 2 and 3 for at least 3 seconds until the green led starts to blink faster, then re-
lease (pic. A).
2) Select channel
Press the key on which you want to store the new code. The led blinks 3 times for confirmation (pic.
B).
3) Add EGO to the receiver
This procedure must be done nearby the automation's receiver. Get closer the receiver and:
a) a) press and hold the EGO key (channel) for about 5 seconds (pic. C);
b) press 3 times the equivalent key on the NICE original transmitter (pic. D);
c) press once the EGO key (channel) again.
pic. C
Please wait at least 10 seconds before trying to activate the automation with the newly pro-
grammed EGO.
If the procedure fails, wait 20 seconds before trying again from step 1.
EGO User manual
MODEL
FLO2R, FLO4R, VERY VR, ERA-INTI2, ERA-ONE2, ERA-ONE4
2
3 sec
3
1 time
5 sec
>>>
GROUP NICE
EGO32
Slow
blinking
PRESS
pic. D
>>>
Fast
blinking
FLASH
pic. B
3
x
3
x
>>>
pic. A
pic. E
19
Advertisement
Table of Contents
