Page 1
AO5000PRO Owner’s Manual This Manual Includes: • Warranty • Safety Warnings • Operating Instructions • Replacement Directions • Troubleshooting Tips • Cleaning and Maintenance Tips Before operating this unit carefully read the contents of this manual. R2019.05.20...
Read all instructions carefully before operating your air purifier. Table of Contents Safety Instructions and Cautions Warranty AHPCO Cell Replacement ® Maintenance and Customer Service Placement and Operation Filter Cleaning Optional Cleaning & Brush Cleaning Troubleshooting Guide...
A dust mask and safety glasses are recommended while performing maintenance tasks. WARNING: RISK OF ELECTRICAL SHOCK. CAN CAUSE INJURY OR DEATH: DISCONNECT ALL POWER SUPPLIES BEFORE ANY SERVICING. CAUTION: The Air Oasis 5000 PRO is intended for commercial and professional use only.
God, the use of voltages other than indicated on the label displayed on this product or service of this product by anyone other than Air Oasis or an Air Oasis authorized dealer. ®...
AHPCO Cell Replacement ® Step 1 CAUTION: Before attempting to service the Air Oasis 5000 unit, be sure the power is off and unplugged. DANGER - NEVER LOOK DIRECTLY AT ILLUMINATED AHPCO CELL ® WARNING OPTICAL RADIATION EXPOSURE HAZARD DO NOT ATTEMPT TO OPERATE UNIT WITHOUT ALLUMINUM SHELL COVERING AHPCO CELL.
Page 7
Step 3 Replace with new cell. Be sure the UV lamp is completely plugged in. For optimal performance, replace both AHPCO Cells every two ® Step 4 While the unit is turned on, press and hold the reset button before the new AHPCO ®...
1-800-936-1764 Please have your serial and model numbers, found on bottom of the unit, handy when calling. Save your sales receipt to show if your Air Oasis appliance should ever need any warranty service. Placement and Operation For best results the unit should be placed in a central location and three feet or higher from the ground.
Filter Cleaning Step 1 1. Pull off filter guards located on the bottom side of the unit. Note: For optimal performance filters should be checked and cleaned often. Step 2 2. Gently remove filters & knock off dust & debris or gently blow off debris using compressed air.
Optional Cleaning Make sure that the power cord is unplugged prior to cleaning. Base - We recommend wiping with a dry towel to remove dust and build up. Honeycomb - Use soft pipe cleaners or compressed air to remove any dust buildup from the honeycomb vent located at both sides of the unit.
Troubleshooting Guide Problem Reason Solution Unit does not turn on. 1. Power Cord 1. Check to make sure power cord is plugged 2. Switch 2. Check to make sure switch is in the on posi- tion. 3. AHPCO Cell ® 3.
Need help?
Do you have a question about the AO5000PRO and is the answer not in the manual?
Questions and answers