Device - D-Link DSP-W320 User Manual

Section 3 - mydlink
To access the device page:
• From the home page, tap
1 Device Photo
2 Device Name
3 Device Location
4 Wi-Fi
5 Power Outlet 1
6 Power Outlet 2
7 Firmware Update
Current Firmware
8
Version
9 Device ID
10 Remove Device
D-Link DSP-W320 User Manual
> Settings > Device > navigate to your device on the carousel.
Tap to add a customized photo of this device.
Tap to change the device's name.
Tap to change or add a new location for this device.
Displays the Wi-Fi network that the plug is currently connected to.
To change it, please factory reset the device.
Tap to configure the settings for Power Outlet 1. You can add a
customized photo of the device it's plugged to and change the name
for easy identification.
Tap to configure the settings for Power Outlet 2. You can add a
customized photo of the device it's plugged to and change the name
for easy identification.
Shows time of auto firmware update. Tap to enter the firmware update
settings. You can choose the most suitable time for automatic updates
as well as turn them off.
This displays the installed version of the firmware on your device.
Identifies the device for support issues.
Tap this button to remove this device from your mydlink account.
Note: To relink the device, reset it to factory default settings and run the setup
process again.

Device

1
2
3
4
5
6
7
8
9
10
12