D-Link DSP-W320 User Manual

D-Link DSP-W320 User Manual

Outdoor wi-fi smart plug


Outdoor Wi-Fi Smart Plug
User Manual
Hardware: A1
Manual Version: 1.00



  Related Manuals for D-Link DSP-W320

  Summary of Contents for D-Link DSP-W320

  • Page 1 Outdoor Wi-Fi Smart Plug DSP-W320 User Manual 08/15/2019 Hardware: A1 Manual Version: 1.00...
  • Page 2 Manual Overview D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change.
  • Page 3: Table Of Contents

    Safety ....................5 Before you Begin ................5 Wireless Installation Considerations ........6 mydlink App Device Setup ............7 Using the mydlink App ............11 Controlling Your Device ............11 Device .....................12 Troubleshooting ..............13 Technical Specifications ..........14 Regulatory Information ..........16 D-Link DSP-W320 User Manual...
  • Page 4: Product Overview

    Section 1 - Product Overview Product Overview Package Contents DSP-W320 || Outdoor Wi-Fi Smart Plug Quick Installation Guide Quick Installation Card If any of the above items are missing, please contact your reseller. Note: Using an electrical outlet with a different voltage rating than recommended for this product will cause damage and void the warranty for this product.
  • Page 5: Introduction

    Section 1 - Product Overview Introduction The D-Link DSP-W320 Outdoor Wi-Fi Smart Plug is a multi-purpose, compact, and easy-to-use device that allows you to control your home’s electric appliances, wherever you are. Scheduling provides a helpful way to save power while you’re at work or asleep, and the mydlink™...
  • Page 6: Hardware Overview

    See LED Behavior on page 4 for LED behavior information. USB Charging Port Plug in a USB device that you wish to supply power to here. Connect your appliances, lamps, or other electronic devices you wish to control Power Outlets here. D-Link DSP-W320 User Manual...
  • Page 7: Led Behavior

    Section 2 - Installation LED Behavior Switched on Power Status LEDs Switched off Booting up / Resetting Connected to Wi-Fi and mydlink System Status LED Ready for set up / Disconnected Firmware being upgraded D-Link DSP-W320 User Manual...
  • Page 8: Installation

    • Connect the device into an electrical outlet that is not controlled by a wall switch. This will help you to avoid accidentally turning off power to the device. • Be sure to plug it in to a grounded electrical outlet in order to help prevent against electrical shock. D-Link DSP-W320 User Manual...
  • Page 9: Wireless Installation Considerations

    Wireless Installation Considerations The DSP-W320 Outdoor Wi-Fi Smart Plug connects to your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range.
  • Page 10: Mydlink App Device Setup

    Download the mydlink app from the App Store (iOS) or Google Play (Android) by scanning the QR code. Note: Ensure your device is connected wirelessly to the network that the DSP-W320 will be in. Launch the mydlink app and create a new account or sign in to your existing account.
  • Page 11 Select Add a Device. Note: For Android devices, if you are asked about allowing the app to access your location, select Allow. Make sure location services and Bluetooth are turned on in your phone’s settings. D-Link DSP-W320 User Manual...
  • Page 12 Follow the onscreen instructions to establish a connection to the device. Choose the Device Location of your device and connect it to a Wi-Fi network. You can also configure the settings for each power outlet. Tap Next when all items have been determined. D-Link DSP-W320 User Manual...
  • Page 13 Section 2 - Installation Tap OK to conclude the setup process. Congratulations, your DSP-W320 Outdoor Wi-Fi Smart Plug is now ready to use! Note: If you experience issues registering this plug with your mydlink account, or if you purchased an open box or resold unit, perform a hard reset by pressing and holding the Reset button on the device until the System Status LED turns red.
  • Page 14: Using The Mydlink App

    Note: Screenshots are representative only. The mydlink app is constantly being updated and so may appear different. After setting up your DSP-W320 Outdoor Wi-Fi Smart Plug with a mydlink account in the mydlink app, you will be able to remotely access your smart plug through the app.
  • Page 15: Device

    Identifies the device for support issues. Tap this button to remove this device from your mydlink account. Remove Device Note: To relink the device, reset it to factory default settings and run the setup process again. D-Link DSP-W320 User Manual...
  • Page 16: Troubleshooting

    In order to use your device remotely through the Internet using the mydlink app, you must register your device with a mydlink account. You can do this using the free mydlink app. Please go to Using the mydlink App on page 11 for more information. D-Link DSP-W320 User Manual...
  • Page 17: Technical Specifications

    • Storage: -20 to 70 °C (-4 to 158 °F) Humidity • Operating: 20% to 80% non-condensing • Storage: 5% to 95% non-condensing Ingress Protection • IP54 Certifications • FCC • RoHS • IC • UL 498A • cUL D-Link DSP-W320 User Manual...
  • Page 18 Appendix A - Technical Specifications Order Information Part Number Description DSP-W320 Outdoor Wi-Fi Smart Plug D-Link DSP-W320 User Manual...
  • Page 19: Regulatory Information

    Note The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be fixed to USA operational channels only. D-Link DSP-W320 User Manual...
  • Page 20 20cm between the radiator and any part of your body. Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation d'au moins 20 cm doit être maintenue entre l'antenne de cet appareil ettoutes les personnes. D-Link DSP-W320 User Manual...