Safety Notices For The Rfm 32 Sl 200 Ex N Devices - Leuze electronic RFM 32 SL 200 Technical Description

Safety notices
Operation in potentially explosive areas
Available for use in rooms with explosive atmospheres are device variants
RFM 32 SL 200 Ex n with certification for use in potentially explosive areas of Zones 2 (gas)
and 22 (dust) (see chapter ).
Attention!
Operation of the RFM 32 SL 200 Ex n in potentially explosive areas is recommended only in
combination with the TFM 0x 1x10.EX transponders from Leuze electronic, which are
approved for use in potentially explosive areas!
Typical areas of application
The read/write systems of types RFM 12/32/62 SL 200 are specially designed for the
following areas of application:
• Object recognition in handling and warehousing systems
• Commissioning systems in dispatch centers
• Flexible material flow control in assembly lines and daisy-chained manufacturing cells
• Acquisition of operational data
2.4

Safety notices for the RFM 32 SL 200 Ex n devices

Safety notices for use in potentially explosive areas of Group II, Category 3,
Zones 2 ("Gas Ex") and 22 ("Dust Ex")
Attention!
This product may only be used by qualified personnel and must only be used for the approved
purpose. This sensor is not a safety sensor and is not to be used for the protection of persons.
Under unfavorable conditions and if used incorrectly in potentially explosive areas, the health
of persons and, if applicable, of animals as well as the safety of property may be endangered.
Safe operation in potentially explosive areas is only possible if the equipment is used properly
and for its intended purpose.
This requires that the installation and operating instructions are adhered to and that appro-
priate measures are taken to ensure that this is effectively and permanently ensured.
Notice!
In order to achieve safe operation of devices of Group II, Category 3, in potentially explosive
areas, installation and protective devices appropriate for the application must ensure that
operational events do not damage or overload the equipment.
6 RFM - HF RFID Series Leuze electronic