5.4.2
Arrangement on the transport system
Notice!
Writing/reading can occur at a standstill and while the transponder is in motion.
± 10° ... 15 °
Figure 5.4:
5.5
Cleaning
Ç Clean the housing of the RFM - HF RFID Series with a soft cloth after mounting. Remove
all packaging remains, e.g., carton fibers or Styrofoam balls.
Attention!
Do not use aggressive cleaning agents such as thinner or acetone for cleaning the device.
Leuze electronic
transponder
Arrangement of the read/write systems on the transport system
RFM - HF RFID Series
Installation and mounting
± 10° ... 15 °
parallel to the
transport system
35