Maintenance
10
Maintenance
10.1
General maintenance information
The RFID devices of the RFM series require no maintenance by the operator.
If a film forms, the devices can be cleaned with a cloth; function is influenced only by metal
dust or liquid present on the device.
Attention!
Do not use solvents or cleaning agents containing acetone.
Use of improper cleaning agents can damage the housing.
10.2
Repairs and servicing
Repairs to the device must only be carried out by the manufacturer.
Ç Contact your Leuze distributor or service organization should repairs be required.
The addresses can be found on the inside of the cover and on the back.
Notice!
When sending devices to Leuze electronic for repair, please provide an accurate description
of the error.
10.3
Disassembling, packing, disposing
Repacking
For later reuse, the device is to be packed so that it is protected.
Notice!
Electrical scrap is a special waste product! Observe the locally applicable regulations
regarding disposal of the product.
58
RFM - HF RFID Series
Leuze electronic