Table of Contents
Advertisement
5
Installation and mounting
5.1
Unpacking
Ç Check the packaging for any damage. If damage is found, notify the post office or shipping
agent as well as the supplier.
Ç Check the delivery contents using your order and the delivery papers:
• Delivered quantity
• Device type and model as indicated on the nameplate
• Brief manual
The name plates provide information about the given device type. For specific information,
please refer to the package insert or chapter 9.1.
Ç Save the original packaging for later storage or shipping.
If you have any questions concerning your shipment, please contact your supplier or your
local Leuze electronic sales office.
Ç Observe the applicable local regulations when disposing of the packaging materials.
5.2
Mounting the RFM read/write systems
The HF RFID read/write systems are mounted in various ways:
• RFM 12 SL 200:
Mounting in Ø 30mm bore hole by means of M30 thread and fastening nuts (BT D30M.5
mounting bracket as optional accessory) or by means of MC 030K mounting clamp
(optional accessory)
Fastening the RFM 12 with optional fastening accessory
BT D30M.5
Figure 5.1:
Leuze electronic
Fastening the RFM 12 with optional fastening accessory
RFM - HF RFID Series
Installation and mounting
MC 030K
31
Advertisement
Table of Contents
