Envirovent energiSava 200 Installation Manual page 7

05 Installation Instructions
Control Options
Frost Protection
When the cell temperature in the unit falls below
5ºC the unit automatically warms the cell with
extracted air to prevent the formation of frost.
Boost - Switch Live
The energiSava 200
®
as standard. It is an automatic function, sending
the unit to boost when the bathroom or kitchen
light is on.
Summer Bypass
The summer bypass helps reduce the air
temperature coming into the dwelling during the
summer months. It is an automatic function and
operates when the supply air temperature to the
property is above 25ºC.
Intellitrac Humidity Tracking
®
When the energiSava
in humidity, caused by increased moisture
generation such as through cooking or
showering, the extract and supply airflows will
slowly begin to increase in direct proportion to
the increase in humidity.
It will then automatically track back down again
when humidity falls. This controls condensation
quietly and efficiently.
Boost - Remote Control
The energiSava 200 unit also comes with a
®
remote control switch which can be used at any
time to send the unit to boost for 20 mins (see
page 13).
AFTER INSTALLING THIS UNIT PLEASE PASS ONTO END USER
DO NOT THROW AWAY
comes with Switch Live
200 unit senses a rise
®
Control Options
Frost Protection
Boost Switch Live
Mechanical Summer
Bypass
Humidity Tracking
Boost - Remote Control
06