Tools Required - NINCOAIR NH92007 RTF Manual

NH92007 RTF – NH92008 ARF GLIDER PRO

3. TOOLS REQUIRED

-Scissors
-Glue
-Pliers
-Crosshead screwdriver
-Allen wrench 3mm
4. INSTALLATION OF TAIL WING SET
1. Tear off double sided tape.
2. Hold horizontal stabilizer, pin the bulge into the concave. See attachment for rudder installation.
Insert the rudder from blade into the fuselage, secure both with glue.
3. Be sure to keep horizontal stabilizer balance at both side and the rudder should be vertical with
horizontal stabilizer.
4. Using foam glue or other suitable glue to reinforce.
5. Connect the throttle on the fuselage to horizontal stabilizer and rudder driver arms, secure with
allen wrench.
4.1 INSTALLATION ALTERNATIVE V TAIL.
NINCOAIR is brand of NINCO DESARROLLOS S.L.
Ctra. de l'Hospitalet 32
08940 Cornella Barcelona Spain
CIF B-60307725 · www.nincoair.com
11