AEG BEK742R21M User Manual page 18

18 www.aeg.com
10.3 Function Lock
This function prevents an accidental
change of the heating function. You can
turn it on only when the oven works.
1. Turn on the oven.
2. Set a heating function or setting.
3. Press
display shows: Function Lock.
4. Press
To turn off the function, press
display shows a message. Press
and then
When you turn off the oven,
the function also turns off.
10.4 Set + Go
The function lets you set a heating
function (or a programme) and use it
later with one press of any symbol.
1. Turn on the oven.
2. Set a heating function.
3. Press
display shows: Duration.
4. Set the time.
5. Press
display shows: Set + Go.
6. Press
Press any symbol (except for
the function: Set + Go. The set heating
function starts.
When the heating function ends, a signal
sounds.
• Function Lock is on when
• The menu: Basic Settings
10.5 Automatic Switch-off
For safety reasons the oven turns off
automatically after some time if a heating
function works and you do not change
any settings.
again and again until the
to confirm.
to confirm.
again and again until the
again and again until the
to confirm.
the heating function
works.
lets you turn the function:
Set + Go on and off.
Temperature (°C)
30 - 115
120 - 195
200 - 245
250 - maximum
. The
again
10.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the oven is
turned off, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the oven is turned on.
– if you touch a symbol during the
– if the oven is turned off and you
) to start
10.7 Cooling fan
When the oven operates, the cooling fan
turns on automatically to keep the
surfaces of the oven cool. If you turn off
the oven, the cooling fan can continue to
operate until the oven cools down.
10.8 Safety thermostat
Incorrect operation of the oven or
defective components can cause
dangerous overheating. To prevent this,
the oven has a safety thermostat which
interrupts the power supply. The oven
turns on again automatically when the
temperature drops.
Switch-off time (h)
12.5
8.5
5.5
1.5
The Automatic switch-off
does not work with the
functions: Light, Food
Sensor, Duration, End Time.
night brightness (apart from ON /
OFF), the display goes back to
the day brightness mode for the
next 10 seconds.
set the function: Minute Minder.
When the function ends, the
display goes back to the night
brightness.