Advertisement
4.17.
use 4 aa bolts, 4 BB nuts and 4 cc washers.
rest the drawer backing (20) on top of the pegboard (11).
take 4 (aa) bolts and place through pegboard frame (10r)
and (10L). fasten and tighten with 4 (cc) washers and 4
(BB) nuts.
Do not over tighten.
4.19.
align holes of front drawer (a1) with left and right side of
drawer (a3 & a4). Insert 2 (DD) bolts per side. fasten
using 2 (ff) lock washers and 2 (EE) nuts.
align holes of rear drawer (a2) with left and right side of
drawer (a3 & a4). Insert 2 (DD) bolts per side. fasten
using 2 (ff) lock washers and 2 (EE) nuts.
tighten all fasteners - Do not over tighten.
Insert wooden drawer bottom (22) so that it rests on lip of
drawers.
slide aluminium handle cover (23) over the top of the front
drawer. repeat for remaining small drawers.
Fig.17
4.18.
use 4 aa bolts, 4 BB nuts and 4 cc washers.
align the holes of the pegboard support bar (21) to the
holes of the cross bracing piece (7) as well as the upper
shelf (17). Insert 4 (aa) bolts through holes and fasten
using 4 (cc) washers and 4 (BB) nuts.
Do not over tighten.
Fig.19
4.20.
align holes of front drawer (D1) with left and right side of
drawer (D3 & D4). Insert 2 (DD) bolts per side. fasten
using 2 (ff) lock washers and 2 (EE) nuts.
align holes of rear drawer (D2) with left and right side of
drawer (D3 & D4). Insert 2 (DD) bolts per side. fasten
using 2 (ff) lock washers and 2 (EE) nuts.
tighten all fasteners - Do not over tighten.
Insert wooden drawer bottom (22) so that it rests on lip of
drawers.
slide aluminium handle cover (23) over the top of the front
drawer.
Original Language Version
Fig.18
Fig.20
ap1205
Issue no.1 25/09/11
Advertisement
