Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this Topchest
& Rollcab combination.
9
Locate the Topchest & Rollcab combination in a suitable working area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the Nonstop & Rollcab combination clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the working area.
8
DO NOT use the Topchest & Rollcab combination for any purpose other than that for which it is designed.
8
DO NOT move the Topchest & Rollcab combination with drawers open.
8
DO NOT open more than one drawer at the same time.
8
DO NOT step on the drawers.
8
DO NOT use in damp work areas.
WARNING! The warnings, cautions and instructions referred to in this instruction manual cannot cover all possible conditions and situations
that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied
by the operator.
2. INTRODUCTION
The economical way to buy American PRO® Ball-Bearing quality tool chests. Supplied packed one inside the other. This combo has smooth
25mm ball-bearing slides and all the features of the professional chests except that the swivel castors are Ø100mm. Features locks on both the
topchest and rollcab, with removable steel bar on the rollcab and integral bars on the topchest. Supplied with two keys for each lock.
3. SPECIFICATION
Model No: ................................. AP2513B.V4/AP22513BB.V3
(W x D x H):
9 Drawer Topchest:
Overall size: ............................................600 x 260 x 380mm
Small 1/2 Drawer (x6):
Small Drawer (x2): ....................................510 x 220 x 35mm
Medium Drawer (x1): .................................510 x 220 x 80mm
4 Drawer Rollcab:
Overall Size: ............................................680 x 330 x 935mm
Small Drawer (x2): ....................................515 x 305 x 45mm
Medium Drawer (x2): .................................515 x 305 x 80mm
Cupboard (x1): ........................................610 x 295 x 425mm
© Jack Sealey Limited
13 DRAWER TOPCHEST & ROLLCAB
COMBINATION WITH BALL-BEARING SLIDES
AP2513B.V4, AP22513BB.V3
MODEL NO:
Original Language Version
AP2513B.V4, AP22513BB.V3 Issue 1 11/03/22