Advertisement
4.9.
use 3 aa bolts, 3 BB nuts and 3 cc washers.
align holes of the right side shelf bracing (14r), and
match them to the pegboard frame (10r).
fasten using 3 (aa) bolts, 3 (cc) washers and 3 (BB) nuts.
Do not over tighten.
4.11.
use 4 aa bolts, 4 BB nuts and 4 cc washers.
take the middle shelf divider (16) and align holes with the
bottom shelving. fasten using 2 (aa) bolts, 2 (cc) washers
and 2 (BB) nuts.
take the left middle shelf divider rail (16a) and align it with
the right middle shelf divider rail (16B) making sure the
middle shelf divider (16) is in between. fasten using 2 (aa)
bolts, 2 (cc) washers and 2 (BB) nuts.
Do not over tighten.
Fig.9
4.10.
use 4 aa bolts, 4 BB nuts and 4 cc washers.
align the holes of the bottom of the shelving unit (15) and
match them to the side shelf bracing (14L) and (14r).
fasten using 4 (aa) bolts, 4 (cc) washers and 4 (BB) nuts.
Do not over tighten.
Fig.11
4.12.
use 8 aa bolts, 8 BB nuts and 8 cc washers.
Take the upper shelf (17) and lay flat so that it is resting on
top of the shelf divider. align holes of upper shelf (17) to
match the left and right side shelf bracing.
take 3 (aa) bolts and insert them into the left shelf bracing,
fasten with 3 (cc) washers and 3 (BB) nuts.
repeat previous step to attach the upper shelf (17) to the
right shelf bracing.
take 2 (aa) bolts and insert them into the top part of shelf
divider, fasten with 2 (cc) washers and 2 (BB) nuts.
NOTE: Now tighten all fasteners on the workbench
upon completion of Step 4.12.
Original Language Version
Fig.10
Fig.12
ap1205
Issue no.1 25/09/11
Advertisement
