Advertisement
Fig.5
4.5.
use 8 aa bolts, 8 BB nuts and 8 cc washers.
align holes on cross bracing (3L) and (4L) to table legs
(1L and 2L). Insert 8 (aa) bolts through matching holes as
shown above - four bolts per cross bracing.
fasten with 8 washers (cc) and 8 nuts (BB).
Do not over tighten.
Fig.7
4.7.
use 8 aa bolts, 8 BB nuts and 8 cc washers.
With drawer rails facing inward, take drawer frame (13) and
fasten to body of frame using 8 (aa) bolts, 8 (cc) washers
and 8 (BB) nuts.
Do not over tighten.
4.6.
use 8 aa bolts, 8 BB nuts and 8 cc washers.
align holes on cross bracing (3L) and (4L) to table legs
(1L and 2L). Insert 8 (aa) bolts through matching holes as
shown above - four bolts per cross bracing.
fasten with 8 washers (cc) and 8 nuts (BB).
Do not over tighten.
4.8.
use 3 aa bolts, 3 BB nuts and 3 cc washers.
align holes of the left side shelf bracing (14L), and match
them to the peg board frame (10L). fasten using 3 (aa)
bolts, 3 (cc) washers and 3 (BB) nuts.
Do not over tighten.
Original Language Version
Fig.6
Fig.8
ap1205
Issue no.1 25/09/11
Advertisement
