2) Screw the rigid conduit onto the unit and tighten the top Phillips head screw as shown in
Figure 2.
3) A D-ring has been provided to secure a safety cable to the TCPA-Omni. The safety cable
is a customer supplied item.
3.0 CHANGING THE POWER LEVEL
1) Change the power level by removing the 4 torx head screws (T-20) from the cover plate on
the side of the unit as shown in Figure 3.
90185A-MAN-OMNI
Figure 2: Location of screw to tighten rigid conduit
Figure 3: The cover plate for the electronics compartment
Copyright © Ultra Electronics – USSI , Columbia City, IN 46725 USA
®
HyperSpike
TCPA - Omni Installation and Mounting Manual
REV B 2015/12/15