VCS VideoJet 10 Manual page 34

Configuration with web browser
Alarm
connections
36
Options are provided to specify the behavior of the VideoJet 10 in
the event of an alarm.
The VideoJet 10, for example, can establish the connection to a
predefined IP address (VideoJet 10 receiver or PC with receiver
software) automatically.
Connect on alarm:
Select On, to automatically establish the connection to a predefined
IP address in the event of an alarm.
Number of video receiver address:
The VideoJet 10 can store up to 10 different alarm IP addresses. In
case of an alarm event the connection will be established to the first
address. Up to ten seperate addresses can be added should the
first address not accept the call. Select the position of the IP
address here.
Live video receiver IP address:
Enter here the IP address to which a connection is to be established
in the event of an alarm.
Live video auto-connect:
Select here the option On if it is required to re-establish a con-
nection to the previously specified IP address after each restart,
e.g. after a connection breakdown or network dropout.
VideoJet 10