Chapter 4 Installation - VCS VideoJet 10 Manual

Installation
VideoJet 10
Due to its compact design and small footprint, the VideoJet 10 can
be used as a desk top unit occupying minimum space.
Warning!
The unit is intended for internal use. Select a suitable location for
installation where the equipment is not subjected to either extreme
temperatures nor to extreme humidity. The ambient temperature
must be between 0 and +50 °C, the relative humidity may not
exceed 80%.
The equipment becomes warm in normal operation. Ensure that
ventilation is adequate and also that there is sufficient clearance
between it and heat sensitive objects or equipment.
The following installation requirements must be satisfied:
Do not mount the equipment in close proximity to heaters or
!
other sources of heat. Avoid locations subject to direct sunlight.
Allow sufficient space for laying of cables.
!
Ensure adequate ventilation of the equipment.
!
Only use the cables supplied when connecting up the equipment
!
or, if necessary, use cables suitably screened for interference.
Position and lay all cables where they will not be subject to dam-
!
age and ensure strain relief is provided where necessary.
4
19