Rear panel connectors
VideoJet 10
1 BNC socket Video In (transmitter) or Video Out (receiver)
for video source or for an analog video monitor
2 Slide switch 75 Ω (transmitter)
for termination of the video input
3 Bidirectional audio interface Audio I/O
3.5 mm stereo jack for connection of a loudspeaker or an audio
source (mono line)
4 Serial interface port COM2: RS232
9-pin sub-D socket (m) for configuration using terminal software
5 Serial interface port COM1: RS232/485
9-pin sub-D socket (m) for control data transmissions
(protocols RS232, RS422 and RS485) and for configuration
using terminal software
6 LED POWER
flashes yellow when ready
Note
You will find further informations on the LEDs on page 61.
Product Description
17