Ubiquiti UniFi UVC-G3-BULLET Quick Start Manual
  1. Manuals
  2. Brands
  3. Ubiquiti Manuals
  4. Digital Camera
  5. UVC-G3-BULLET
  6. Quick start manual

Ubiquiti UniFi UVC-G3-BULLET Quick Start Manual

Hide thumbs Also See for UniFi UVC-G3-BULLET:
Table of Contents

Advertisement

Quick Links

Download this manual
Package Contents
Camera
Self-Tapping Screws (Qty. 2)
Installation Requirements
Shielded Category 5 (or above) cabling should be used for all wired Ethernet
connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor
environments and destructive ESD events with industrial-grade, shielded Ethernet
cable from Ubiquiti. For more details, visit
Hardware Overview
UVC-G3-BULLET Quick Start Guide
Cable Gland
Pole Mount Bracket
Screw Anchors (Qty. 2)
Machine Screws (Qty. 2)
ui.com/toughcable

Advertisement

Table of Contents
loading

Related Manuals for Ubiquiti UniFi UVC-G3-BULLET

Summary of Contents for Ubiquiti UniFi UVC-G3-BULLET

  • Page 1 AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet ui.com/toughcable cable from Ubiquiti. For more details, visit Hardware Overview...

  • Page 2: Hardware Installation

    UVC-G3-BULLET Quick Start Guide Ethernet Port 10/100 RJ45 port connects to an 802.3af PoE switch for PoE power and data. Reset Button To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the camera is powered on. Hardware Installation Wall/Ceiling Mount...
  • Page 3 UVC-G3-BULLET Quick Start Guide...
  • Page 4 UVC-G3-BULLET Quick Start Guide 5.  ...
  • Page 5 UVC-G3-BULLET Quick Start Guide...
  • Page 6 UVC-G3-BULLET Quick Start Guide...

  • Page 7: Pole Mount

    UVC-G3-BULLET Quick Start Guide Pole Mount...
  • Page 8 UVC-G3-BULLET Quick Start Guide...

  • Page 9: Connecting Power

    UVC-G3-BULLET Quick Start Guide Connecting Power...
  • Page 10 UVC-G3-BULLET Quick Start Guide UniFi Protect Mobile App Launch the UniFi Protect Mobile App and follow the on-screen instructions to complete setup. Adjusting the Camera View...

  • Page 11: Specifications

    UVC-G3-BULLET Quick Start Guide Specifications UVC-G3-BULLET Dimensions Ø 75 x 140 mm (Ø 2.95 x 5.51") Weight 300 g (10.58 oz) Enclosure Injection-Molded Polycarbonate and Die-Cast Aluminum Networking Interface (1) 10/100 Ethernet Port Sensor 1/3" 4-Megapixel HDR Sensor Lens EFL 3.6 mm, f/1.8 Viewing Angle Before Lens Correction 85°...

  • Page 12: Safety Notices

    UVC-G3-BULLET UVC-G3-BULLET Quick Start Guide Resolution 1080p Full HD (1920 x 1080) Maximum Frame Rate 30 FPS Image Settings Brightness, Contrast, Sharpness, Saturation, Noise Reduction, 50/60 Hz Processor Ambarella S2L Memory 512 MB DDR3L Management Interface UniFi Protect Microphone Max. Power Consumption Power Method 802.3af or 24V Passive PoE Power Supply...

  • Page 13: Limited Warranty

    Limited Warranty UVC-G3-BULLET Quick Start Guide ui.com/support/warranty The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions. Compliance Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

  • Page 14: Online Resources

    Online Resources UVC-G3-BULLET Quick Start Guide © 2022 Ubiquiti Inc. All rights reserved.

Table of Contents