Advertisement
9
To associate a TAG to a user
1
1 - Press and hold the user number "0 to 9" key for 3 seconds (1 is the
master).
A double beep is played and all LEDs light on.
2 - Enter the master code or present the master tag.
A beep is played and all status LEDs start flashing.
3 - Present a new TAG.
The programming mode ends automatically.
4 - After a few seconds, a double beep is played and all status LED stop
flashing.
The operation fails if the TAG is already registered.
If the user already has a TAG, the new one will take its place.
© 2015 by Honeywell International Inc. All rights reserved.
Advertisement
