Advertisement
9
To disable a user
1
1 - Press and hold user number "0 to 9" key for 3 seconds.
Note: it is not possible to disable the master user.
A double beep is played and all status LEDs light on.
2 - Enter the master code or present the master tag.
A high beep is played and all status LEDs start flashing.
3 - Press the
The programming mode ends automatically.
4 - After a few seconds, a double beep is played and all status LED stop
flashing.
© 2015 by Honeywell International Inc. All rights reserved.
key to disable the user.
Advertisement
