Advertisement
9
Adjust beep volume
1
1 - Press
and
seconds to enter user programming mode.
A double beep is played and all LED light on.
2 - Keep pressing the
(each device will emit a beep when it is selected).
Example: If you want to adjust the beep level for device 2: press the
key twice. Device 2 will emit a beep to confirm its selection.
All LEDs start flashing.
3 - Press a key from
min, 7 = max).
The device selected will emit a beep at the new level to confirm
the beep volume.
4 - Press the
changes.
5 - After a few seconds, a double beep is played and all LED stop flashing.
© 2015 by Honeywell International Inc. All rights reserved.
hold the and keys simultaneously more than 2
key to select the device that you wish to adjust
to
to select the required beep volume (1 =
key to exit user programming mode and save you
Advertisement
