Setting Up A Wireless Wifi Connection - AVM EVOLUTION MP 3.2 Operating Instructions Manual

ü Switch on the device on the rear side of the unit (30). Wait until the device has started and went
into stand by mode. Now, switch it on with the power button on the front side (1).
ü After a brief starting process, your device automatically connects to your local home network and
is ready to be operated via the
ü Launch the RC S App on your smartphone or tablet. The RC S App will now automatically search
and list all available AVM devices in your local network with their respective device name and IP
adress (e.g. "192.168.xxx.x" etc.).
ü Choose an availbale device and wait until a connection is established.

Setting up a wireless WiFi connection

To set up your device with a wireless WiFi connection, you need to download and install the free
App for iOS and Android
refer to the installation process by use of the RC S App. For details on how to connect your device with
the RC 9 remote control, please refer to section 0. A detailed description of the entire functionality of
the RC 9 remote control and the
the respective product pages of our AVM website: www.avm.audio.
NOTE: Before using the wireless WiFi functionality of your device, an initial set-up of a wired LAN
connection is mandatory. This non-recurring step is required to set-up an initial WiFi connection
between your device and the RC S App via your local home network.
ü Please switch off your device on the rear side of the unit (30).
ü Plug a LAN cable from your local router into the LAN port of your device (25).
ü Switch on the device on the rear side of the unit (30). Wait until the device has started and went
into stand by mode. Now, switch it on with the power button on the front side (1).
ü After a brief starting process your device automatically connects to your local home network and is
ready to be operated via the
ü Launch the RC S App on your smartphone or tablet. The RC S App will now automatically search
and list all available AVM devices in your local network with their respective device name and IP
adress (e.g. "192.168.xxx.x" etc.).
RC S App for iOS and Android.
or use the optionally available RC 9 remote control. The following instructions
RC S App for iOS and Android
RC S App for iOS and Android.
can be found in a separate manual on
9
RC S