Table of Contents
Advertisement
Playable disc formats
Your Media Player can play back all compact discs which are recorded according to the red book
standard (means the standards for audio CDs established by Philips and Sony). Furthermore, all CDRs
and CDR/Ws with good reflection recorded according to this standard are playable. Most copy
protected discs are also playable. But we cannot take responsibility that all future copy protection
systems are playable.
Insert / eject a CD
Insert a CD
Your Media Player is provided with a slot-in CD drive. Insert the CD (coverside up) and push slightly.
The drive will now automatically draw the disc inside. After that the player reads the TOC and shows it
on the display. Most left is the number of the actual track followed by the total number of tracks on the
CD (for example "1/17"). The middle f the display shows the total playing time of the CD.
NOTE: If there is still a CD inside or the unit is in stand by, the slot will be blocked. If the inserted disc
is not readable (DVD, data-CD) the display will show "no playable disc"-
Eject CD
Press the EJECT button (15). Then the disc will be ejected.
AUTO-CD function
If CD is not selected as source the unit will automatically change to CD from any other input after you
have inserted a CD.
CD playback
If a disc is inside playing is started by pressing the play button (12). If you press PAUSE (11) the unit
will go into the pause mode until PLAY (12) or STOP (10) is pressed.
Using the skip buttons (13, 14) you can easily access any title on the disc. When you press one of the
skip buttons for longer than a second while the unit is playing, it begins to play in fast forward or
reverse mode.
The actual state (PLAY, PAUSE, STOP) is shown in the display (8). Furthermore, the display shows the
actual playing time, the actual title number and the total number of titles.
Repeat
Press the repeat button (6) once to repeat the actual title, twice to repeat the whole CD or the
programmed sequence. A third pressing returns to the normal playing mode. The repeat state is
displayed in the upper line of the display (8).
Programming an individual playlist
If a disc is inside the player you can program your individual playing sequence as follows: Tip on the
PROG button (4) to enter the playlist-menu.
•
Pressing STOP (10) exits the menu and the unit will return to normal mode.
•
Pressing PAUSE (11) generates a random playlist.
•
Pressing PLAY (12) leads you to the programming menu.
14
Advertisement
Table of Contents
