Software Updates - AVM EVOLUTION MP 3.2 Operating Instructions Manual

Hide thumbs Also See for EVOLUTION MP 3.2:
Table of Contents

Advertisement

ü The integrated streaming module of your device will now restart. This process can take up to 30
seconds. Please make sure to not switch off the device while it is restarting (which is happening
under the hood without any indication on the display of the device).
ü The device is now connected with your wireless WiFi network.
PLEASE NOTE: When switching from a wired LAN connection to a wireless WiFi connection or vice
versa, a restart of the integrated streaming module is always required. To restart the streaming module
via the RC S App, please go to the Settings tab, choose Device Settings, Network, and press the
Restart button on the upper right-hand corner. Switching off the device on the rear-side with the
mains switch (30) also causes a restart of the integrated streaming module.

Software updates

To get the most out of your AVM HiFi streaming system, please make sure you always keep the RC S
App and the streaming software of your device up-to-date. You can download the latest version of the
RC S App in the
Apple App Store
latest version of the streaming software, please make sure the device is connected to the internet (see
section 0) and follow the instructions below.
ü Streaming software update via the RC S App: Navigate to the Settings tab and choose Device
Settings / Software / Check for Updates.
ü Streaming software update via the RC 9 remote control: Navigate to the Receiver Settings
menu and choose Software / Update.
or the
Google Play
Store. To check whether your device runs the
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Evolution mp 5.2

Table of Contents