Table of Contents
Advertisement
3. Advanced settings
Personal setup menu
The personal setup offers you a range of settings to individualize the device according to your personal
needs. To enter the personal setup menu, please switch off your device on the rear of the unit at the
mains switch (34). Keep the PROG button (4) pressed while you switch on the unit again. As soon as
the display shows *** personal setup *** menu you can release the PROG button (4).
When the personal setup is active you can select the desired function using the option keys (2,3). Use
the Skip buttons (13,14) to apply changes to a selected function. EXIT exits the personal setup and
stores the settings.
Set display brightness
Sets display brightness between 25% and 100%.
NOTE: The setting 100% can lead to "burn in" effects on the display if the unit is operated in this
setting for a very long time. So please switch the unit to stand by, if not in use.
Set autoplay
When AUTOPLAY is ON, your Media Player will start playing automatically every time a new CD is
inserted. If AUTOPLAY is OFF, the player will read the TOC (Table Of Content) of the inserted disc and
then go to STOP mode.
Skip unused inputs
Deactivate unused inputs ("SKIP"). The unit will then skip these inputs when the option keys are
pressed (2,3) or if you select the inputs via the remote control.
Define input names
You can individually set the names (max. 8 characters) of the different sources shown in the display (8).
Proceed as follows:
Press < or > (2,3) to select the input. Press REPEAT (6) to select the position and I<< or >>I (13,14) to
define the character (holding the key pressed changes the character every half second).
Reset menu (Factory Settings)
This function cancels certain or all settings and makes the unit return to default settings.
To enter the reset menu, please switch off your device on the rear of the unit at the mains switch (34).
Keep both the REP button (6) and the STOP button (10) pressed while you switch on the unit again
(34). As soon as the display shows the reset menu you can release both buttons (6,10).
Select if you just want to clear the input names (NAMES) with the PAUSE button (10) or reset the unit
completely (ALL) by pressing the PLAY button (12).
Pressing the STOP button (10) will bring the unit back to normal operating mode without resetting any
item (CANCEL).
17
Advertisement
Table of Contents
