Table of Contents
Advertisement
A detailed description of the entire functionality of the optionally available RC 9 remote control can be
found in a separate manual on the product page of our AVM website at www.avm.audio.
Pairing
In order to control your device with a RC 9 remote control, both components need to be linked first.
This process is also referred to as Pairing. To start the pairing process, please switch off your device
by using the mains switch (30) on the rear side of the unit. Now please navigate to the Systems
Settings menu on your RC 9 remote control by pressing the Settings key and navigate to the menu
item Start Pairing without selecting it with the Enter key yet. Switch on your device by using the mains
switch (30) on the rear side of the unit and immediately press the Enter key of your RC 9 remote
control to now start the Pairing process. The name of a succesfully detected device will
instantaneously be shown on the display of your RC 9 remote control and can be edited by using the
alphanumeric input keys of the RC 9 remote control. After confirming the name of the paired device
with the Enter key, you can also choose one of four available Hotkeys. Details on how to use the
Hotkey function of your RC 9 remote control can be found in a separate manual on the RC 9 product
page on our website at www.avm.audio. By pressing the Enter key on your RC 9 remote control again,
the pairing process is completed.
RC S App for iOS and Android
The RC S App for iOS and Android will turn your smartphone or tablet into an easy-to-use remote
control and provides a variety of intuitive features to get the most out of your network-enabled device.
The RC S App is available free of charge and can be downloaded from the
Apple App Store
and the
Google Play
Store. A detailed description of the entire functionality of the RC S remote control can be
found in a separate manual on the product page of our AVM website at www.avm.audio.
Network installation (LAN, WiFi)
In order to use the variety of integrated streaming funtions such as Music Server (local NAS drives
etc.) or Online Services (TIDAL, Qobuz, Webradio, Podcasts) your device needs to be connected to
the internet via a router in your local home network. You can choose from a wired LAN connection (25)
or a wireless WiFi connection. In order to use the wireless WiFi connection of your device, the included
WiFi antenna needs to be installed first (23).
LAN vs. WiFi
Before using the wireless WiFi functionality of your device, an initial set-up of a wired LAN connection
is mandatory. This non-recurring step is required to set-up an initial WiFi connection between your
device and the RC S App via your local home network.
NOTE: To ensure a smooth WiFi operation of your device, it is highly recommended to remove the LAN
cable after the intial set-up process described in section 0 has successfully been completed. This is
because a wired LAN connection is always prioritized by the device which automatically leads to a
wired LAN connection as soon as a LAN cable is connected at a later time and the device has been
restarted by switching it off and on again via the mains switch on the rear side of the unit (30).
Please make sure to carefully follow all steps below to successfully set up a wired LAN connection or a
wireless WiFi connection.
Setting up a wired LAN connection
ü Please switch off the device on the rear side of the unit (30).
ü Plug a LAN cable from your local router into the LAN port of the device (25).
8
Advertisement
Table of Contents
