Flamerite Fires Corello Installation Precautions

Advertisement

Quick Links

Carefully remove the fire from the packing, checking that neither the heater nor the power cable has been damaged during transport. Do not
operate the fire if either is damaged. Please bear in mind the weight of the fire before removal from the packaging and installation. Consider if
help is required. Any alteration to the power cable should only be done by a qualified electrician and to the Flamerite Fires guidelines stated
below. Your fire is guaranteed for one year from the date of purchase. In the unlikely event of a breakdown you have access to our customer
services team, simply call 01543 251122 during office hours, 9am – 5pm or e-mail on
box that is packed at the side of the fire.
IMPORTANT SAFTY INFORMATION & WARNINGS
WARNING: In order to avoid overheating, do not cover the heater.
For indoor use only.
Do not use the fire in the vicinity of a bath, shower or swimming pool.
Never use the fire to dry laundry.
The heater must not be located immediately below a socket outlet.
The use of an extension lead is not recommended.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not
be made by children without supervision.
Children of less than 3 years should be kept away unless continuously supervised
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed
in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
Some parts of this product can become very hot and cause burns. Particular attention must be given where children and vulnerable
people are present
Caution should be applied to ensure that children do not play with the fuel effects.
As with any electrical appliance whilst the instructions aim to cover as many eventualities as possible, caution and common sense
should be applied when operating your appliance, particularly in the vicinity of small children.
CAUTION: The heater is fitted with an automatic cut out to prevent any damage due to overheating. The element will continually
and automatically cut out if the airflow is obstructed. Never cover the air outlets. To reset, switch the fire off, disconnect from the
mains supply, remove the cause of the overheating. Allow to cool for a suitable period then switch the fire back on.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut out, the appliance must not be supplied
through an external switching device, such as a timer, or connected to a circuit regularly switched on and off by a utility.
Where a chimney is not blocked off completely, any draw will cause the heater to cut out during
use. Care should also be taken when fitting into a cavity wall in case of damp or draft with external
Corello/Yukon
This product is only suitable for well insulated spaces or occasional use
Installation & Precautions
air vents fully sealed
info@flameritefires.com
The accessories are found in a

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Corello and is the answer not in the manual?

Questions and answers

Summary of Contents for Flamerite Fires Corello

  • Page 1 Please bear in mind the weight of the fire before removal from the packaging and installation. Consider if help is required. Any alteration to the power cable should only be done by a qualified electrician and to the Flamerite Fires guidelines stated below.
  • Page 2 INSTALLATION Electrical connections: Your appliance comes fitted with a plug that incorporates a 13A fuse. The replacement fuses must be 13A and ASTA approved. If the fuse cover is lost the plug must not be used until a replacement cover, of the same colour, is obtained from an electrical retailer.
  • Page 3 MAINTENANCE Before any maintenance/cleaning is undertaken, always disconnect the fire from the mains power supply. Replacing Lamps (Dimmable 240V 6W 3000k E14 LED lamps): Replacements are available from Flamerite Fires info@flameritefires.com Allow a suitable time for the lamps to cool then remove the glass & fuel effect (see Installation). Remove the two screws from either side of the fuel bed and lift out of place.

This manual is also suitable for:

Yukon

Table of Contents