Intended Use; Safety Conscious Working Methods - KERN HFM Service Manual

2.4 Intended use

▲ Use the crane scale exclusively for lifting and weighing freely moveable loads.
▲ Danger of injury in case of improper use. For example, the following is not
permitted:
–exceeding the permissible nominal load of the crane, crane scale or any type
of load attachment equipment,
–transporting persons,
–pulling loads at an angle,
–tearing loose, pulling or dragging loads.
▲ Changes or modifications to the crane scale or the crane are not permitted.

2.5 Safety conscious working methods

▲ Do not stand under suspended loads.
▲ Only position the crane so that the load is lifted vertically.
▲ Wear personal safety equipment (helmet, safety gloves) when working with the
crane and crane scale.
▲ Do not leave controls while load is suspended.
▲ Operate the crane at a safe speed.
▲ Do not allow the load to swing when it is being moved.
Decommissioning and storage
▲ When the crane scale is not in use, always remove all load attachment equip-
ment from the crane scale and remove the crane scale from the crane.
▲ Do not store the crane scale outdoors.
HFM-SH-e-1110 5