Technical Specifications - ADJ Startec RAYZER User Instructions

Rayzer
Please Note: Specifications and improvements in the design of this unit
and this manual are subject to change without any prior written notice.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS
This product has been tested and found to comply with the limits as per Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installa-
tion. This device uses and can radiate radio frequency energy and, if not installed and used in accordance
with the included instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this device does cause harmful
interference to radio or television reception, which can be determined by turning the device off and on, the
user is encouraged to try to correct the interference by one or more of the following methods:
· Reorient or relocate the device.
· Increase the separation between the device and the receiver.
· Connect the device to an electrical outlet on a circuit different from which the radio receiver is
connected.
· Consult the dealer or an experienced radio/TV technician for help.
ADJ Products, LLC - www.adj.com - Rayzer User Manual Page 24
Specifications
Voltage:
LEDs:
Lasers:
Working Position:
Power Draw:
Fuse:
Weight:
Dimensions:
Colors:
DMX Modes:
Warranty:
100V ~ 240V/50~60Hz
126 x 0.2W SMD 3-in-1 RGB LED's
Red, Green, & Blue Laser Diodes
Any safe working position
53W
1A
4.63 lbs./ 2.1 Kgs.
8.26" (L) x 7.87" (W) x 9.25" (H)
210 x 200 x 235mm
RGB
5 / 8 / 29
2 Year (730 days)

Technical Specifications