Table of Contents
Advertisement
Settings
Menu Item
Units
Language
LCD Backlight
LCD Contrast
Protected Menus
Auto Idle
Only operator-faced text is translated. Faults, Service,
and Diagnostics screens are service-faced. The titles
are in the selected language, but the menu items are
in English.
About
Menu Item
Model
SN
Machine Controller Revision
InfoCenter Revision
CAN Bus
Protected Menus
There are 2 operating configuration settings that are
adjustable within the Settings Menu of the InfoCenter:
auto idle time delay and stationary regeneration.
These settings can be locked by using the Protected
Menu. Refer to
Diesel Particulate Filter Regeneration
(page
24).
Note:
At the time of delivery, the initial password
code is programmed by your distributor.
Accessing Protected Menus
Note:
The factory default PIN code for you machine
is either 0000 or 1234.
If you changed the PIN code and forgot the
code, contact your Authorized Toro Distributor for
assistance.
Description
Controls the units used on the
InfoCenter; The menu choices
are English or Metric.
Controls the language used
on the InfoCenter*
Controls the brightness of the
LCD display
Controls the contrast of the
LCD display
Allows a person authorized
by your company with the
PIN code to access protected
menus.
Controls the amount of time
allowed before returning the
engine to low idle when the
machine is stationary
Description
Lists the model number of the
machine
Lists the serial number of the
machine
Lists the software revision of
the master controller
Lists the software revision of
the InfoCenter
Lists the machine
communication bus status
1.
From the M
AIN
scroll down to the S
right button
(Figure
2.
In the S
ETTINGS
scroll down to the P
the right button
3.
To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(Figure
9B and
until the last digit is entered and press the right
button once more.
4.
Press the middle button to enter the PIN code
(Figure
9D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
17
M
, use the center button to
ENU
M
and press the
ETTINGS
ENU
8).
Figure 8
M
, use the center button to
ENU
M
and press
ROTECTED
ENU
(Figure
9A).
Figure 9
Figure
9C). Repeat this step
g028523
g028522
Advertisement
Table of Contents
