Philips FC6149 Manual page 6

ENGLISH
6
- Perhaps the filter unit is not placed in the dust compartment properly. Place the filter unit
in the dust compartment properly.
5 The vacuum cleaner does not work properly when one of the attachments is attached
to the nozzle.
- Check if the attachment is blocked. If this is the case, remove the obstruction.
- The dust compartment may be full. Empty the dust compartment.
- The filter unit may be clogged. Clean both parts of the filter unit.
6 FC6142 only: The surface is still very wet after vacuuming liquid.
- Perhaps the squeegee is not attached to the nozzle. Attach the squeegee to the nozzle when
you want to vacuum up liquid.
- Perhaps you do not hold the appliance in the right way. Hold the appliance with the nozzle
pointing downwards at an angle of 30°. Do not tilt the appliance to one side and make sure the
squeegee touches the surface to be cleaned.
7 FC6142 only: Liquid leaks from the appliance.
- The filter unit may be wet. Make sure both parts of the filter unit are dry before you place
the filter unit in the dust compartment.
- You may not have put the filter unit in the dust compartment. Never use the appliance without
the filter unit.
- Perhaps the filter unit is not placed properly in the dust compartment. Place the filter unit
properly in the dust compartment.
- Perhaps the amount of liquid in the dust compartment exceeds the maximum indication.
Empty the dust compartment immediately and dry it. Never let the dust compartment fill up
with liquid beyond the maximum indication.
8 The appliance produces a lot of noise.
- There may be solid particles in the dust compartment. Empty the dust compartment.