Advertisement
3. SPECIFICATION
3.1.
Specification
4. ASSEMBLY
F
WARNING! ENSURE THAT THE SAW IS NOT CONNECTED TO THE MAINS POWER BEFORE COMMENCING ASSEMBLY.
4.1.
Saw stand or bench
4.2.
Blade guard
4.3.
Extraction
F
WARNING! Wood dust can be harmful to health by inhalation and skin contact and concentrations of small dust particles in the air can
form an explosive mixture. Therefore, ensure that there is adequate ventilation and that the saw is attached to a dust-extraction unit.
5. ADJUSTMENTS
F
WARNING! ENSURE THAT THE SAW IS NOT CONNECTED TO THE MAINS POWER BEFORE MAKING ANY ADJUSTMENTS.
5.1.
Cutting depth
5.2.
Angle of cut
Firmly tighten locking handle.
Initial set-up -
5.3.
Splitter
5.4.
Cross stop (Mitre gauge)
I
CAUTION!
fig. 2
i.e.blade is tilted
fig. 3
right-hand
Advertisement
