Fm Radio Function; Fm Radio Scanning - Baofeng UV-3R Mark II Reference

FM RADIO FUNCTION

Press and hold the [LAMP] button to activate the FM Radio
Mode.
Press and hold the [LAMP] button again, to EXIT the FM Radio
Mode.
Rotate the [ DIAL ] knob to adjust the frequency. (The FM
broadcast coverage is 87.0MHz to 108.0MHz, Frequency step as
100KHz).
Press and hold the [ U/V ] to switch the FM radio frequency
mode and the FM radio save channel mode.
To save the FM radio channel:
1) Under the FM radio frequency mode, set the frequency you
want to save.
2) Press the [ F/ALERT ] button, and then press the [ U/V ]
button.
3) Rotate the [ DIAL ] to the channel number where you want to
save the frequency.
4) Press the [ U/V ] button to confirm saving.
In the FM radio mode, the communication between transceivers
is priority. That means in the FM radio mode, when the signal
come, the transceiver will automatically exit the FM radio
mode.

FM RADIO SCANNING

Radio mode, press [ F/ALERT ] button, then press [
MENU/LOCK ] key to scan the complete band. Clockwise or
counterclockwise rotation of [ DIAL ] knob to scan the band
from low to high or from high to low. When searches the certain
channel, the scanning will stop at the channel. Rotate the [
DIAL ] knob, continuously to scan from low to high or from
high to low. Press any key to exit the scanning
Baofeng UV-3R Mark II Reference 13