Chapter 7: HD View System Management
To update the DDC:
1. Select a Receiver and press "Get DDC" to read the DDC from
the monitor attached to it and save it to file.
2. Select the Transmitter and press "Set DDC" to read from the
saved file and upload it to the Transmitter.
NOTE: Update the DDC information if you add or replace a
monitor with a different resolution/refresh rate.
Get stored DDC button – Press to get the DDC stored in the
Transmitter flash memory and save it as a file on the computer's
hard disk. This DDC data will be read by the player connected to
the Transmitter.
7.7.3 Service
To restore factory defaults press "Restore to factory settings."
NOTE: All configuration and tuning adjustments will be lost.
7.7.4 Security
Choose "Tools/Options." In the Preferences window, click
"Security." The Security screen appears.
Figure 7-17. Security window.
724-746-5500 | blackbox.com
Page 47