Chapter 7: HD View System Management
Selecting all
To select all:
Choose "Edit/Select All."
7.4.2 Sending Commands
Once the desired units are selected send the desired command
by pressing the appropriate Control icon. By default all signals
(video, audio, Serial) are broadcast.
Sending/blocking video
Click
to toggle between sending and blocking video. When
receiving video the device icons appear like this:
When not receiving video, the device icons appear like this:
Sending/blocking audio
Click
to toggle between sending and blocking audio. When
receiving audio the device icons appear with a speaker like this:
.
Sending/blocking a Serial command
Click
to toggle between sending and blocking a Serial
command.
When sending a Serial command the device icons appear with
an arrow like this:
.
Sending/blocking a bi-directional Serial command
When sending a Serial command, you can send a bi-directional
Serial command to a single Receiver/Receiver—LR.
Click
to send the bi-directional Serial command. The device
icon appears with a double arrow like this:
. Click again to
block the bidirectional Serial command. You can then send the
bi-directional Serial command to a different Receiver/Receiver—
LR.
724-746-5500 | blackbox.com
Page 38