Auto-Detect - Black Box AC3000A-R2 Series Manual
Combines video, audio, and serial functions for distributing real-time multimedia content from a player to multiple screens up to 1000 feet (300 m) away.
Hide thumbs
Also See for AC3000A-R2 Series:
- Quick start manual (16 pages) ,
- Quick start manual (20 pages)
Table of Contents
Advertisement
Chapter 7: HD View System Management
You can detect the topology automatically or configure it manu-
ally.
7.3.3 Auto-detect
NOTE: Auto-detection only works if the Service Utility is online.
Check the Title line of the Service Utility window (see
Figure 7-4). When offline, connect to the system by
choosing "File/Connect."
To auto-detect the topology, click and when prompted, click
"Yes."
A detected topology appears on the left showing all connected
HD View units, as in the following figure.
NOTE: You can detect the current topology at any time by
pressing the Detect button. This fully updates all
connected and disconnected ports.
NOTE: Auto-detect deletes all names given to particular ports.
Naming ports is explained in Section 7.3.6.
Tip: Hold the mouse over any of the rows in the menu tree or
over any button. A callout appears with information about
the device or button function.
Page 32
Figure 7-5. Auto-detected topology.
724-746-5500 | blackbox.com
Advertisement
Table of Contents
