Naming A Port; Saving A Topology - Black Box AC3000A-R2 Series Manual

Chapter 7: HD View System Management
Figure 7-6. Manually displayed topology.
3. To define the units connected to the ports, click the checkbox
of a port or a number of ports that have the same device
connected.
4. Click the "Select device" button. A drop-down menu
appears.
5. Select the device type.
NOTE: When the device is a Line Splitter, repeat the process of
defining the connected devices for each port of the Line
Splitter.

7.3.6 Naming a Port

To give a port an identifying name:
1. Check the port number (ensure that no other ports are
checked). In the manual section, "Set device name:" appears.
2. Type a new name for the port. (You can give ports identical
names.) This name appears immediately on the left.

7.3.7 Saving a Topology

To save a topology choose File/Save or Save as. Save the
topology.
Page 34
724-746-5500 | blackbox.com