Hd View System Management; Installing The Service Utility - Black Box AC3000A-R2 Series Manual

Chapter 7: HD View System Management

7. HD View System Management

The HD View system comes with a Service utility to configure
and control the system. Use the Service utility to:
• Define up to 16 Groups of monitors (a specific monitor may
belong to several Groups).
• Broadcast/disconnect video and/or audio and/or serial data to
each monitor or to Groups of monitors.
• View system topology and switching status of each monitor.
• Remotely tune a monitor.
• Remotely upgrade each system component firmware/software
or Field Programmable Gate Array (FPGA).
• Configure DDC settings.
• Return to the factory default settings.

7.1 Installing the Service Utility

The Service utility is located on the supplied CD and on our Web
Site (blackbox.com).
Install the Service utility on a computer with the following
system requirements:
• Intel Pentium
®
• Windows XP Professional, Home Edition, or Tablet PC Edition
with Service Pack 2; Microsoft
Pack 4; Windows 2003 Server; or Windows Vista™
• 128MB of RAM
• 10MB of available hard-disk space
For full functionality of the Service utility, the HD View system
(Transmitter, Line Splitters and Receivers) must be connected and
switched on. You can also configure the system topology
manually even when the system is not operational.
724-746-5500 | blackbox.com
II or equivalent processor
®
Windows 2000 with Service
® ®
Page 29