Table of Contents
Advertisement
Step 4
Press Enter in subsequent steps until the following information is displayed on the terminal simulation
software, and then enter the user name and password. The default user name for the first login is admin
and the default password is admin@huawei.com. You must change the password after login.
Login authentication
Username:admin
Password:
Warning: The default password poses security risks.
The password needs to be changed. Change now? [Y/N]: y
Please enter old password:
Please enter new password:
Please confirm new password:
The password has been changed successfully
<HUAWEI>
The password entered in interactive mode is not displayed on the screen.
If you do not change the authentication mode and password after entering the user view, the authentication password
used for next login is the one configured during the first login.
You can run commands to configure the device. Enter a question mark (?) whenever you need help. For more
information, see the Configuration Guide for your switch on the Huawei support website.
6 Installing the Switch
Scenario 1: Pole Mounting
Before You Start
The depth of the S5720I-6X-PWH-SI-AC is 110 mm.
The depth of the S5720I-10X-PWH-SI-AC is 100 mm.
In pole-mounted installation scenarios, the switch must be mounted to a vertical round pole.
When installing the switch, use the installation kit and hose clamps delivered with the switch.
Wear protective gloves during installation.
Never install the switch while the power is on.
Keep the paint coating on the surface of the switch intact. If there is any peeling paint,
re-paint the switch to protect the switch from corrosion.
Required Items and Tools
Protective gloves
Phillips torque screwdriver (with a shaft of at least 130 mm in length)
Installation Procedure
Step 1 Use the positioning sticker to mark the
installation position of the installation
kit on the pole.
Positioning sticker
M6 inner hex torque screwdriver
Cable hole
Ladder
Step 2 Open the hose clamps.
Step 3 Feed the hose clamps through the installation
kit (mounting side).
4
390 mm
300 mm
100 mm/110 mm
M6
3 N·m
Advertisement
Table of Contents
