NEC Bull NovaScale R620 Series Setup Manual page 73

Setting up ESMPRO Agent
The settings of installed ESMPRO Agent remain unchanged from those at shipment. Click the [Start] button, [Setting],
and [Control Panel] sequentially to open [Control Panel].
If you double-click the [ESMPRO Agent] icon in [Control Panel], the property dialog box will appear. Modify the
setting of each sheet in the dialog box to be fit to the used environment. The notes on setup and the necessary
information are explained in "Supplement" in Chapter 5 of User's Guide in the separate volume. See the supplement
for setup or suspicion of malfunction.
Uninstall
Configuring ESMPRO Agent and BMC and uninstalling BMC FW Update Service are described below.
Uninstalling of ESMPRO Agent
The procedure of uninstalling ESMPRO Agent is described below.
IMPORTANT:
Uninstalling ESMPRO Agent
Start uninstalling ESMPRO Agent after the system is started completely.
If ESMPRO Agent is uninstalled just after the system start-up, the setup program may freeze
displaying the [Service Being Deleted...] dialog box. Shutdown the system by using "Task Manager"
or other operation. Then uninstall ESMPRO Agent after the system is started completely.
In the system that operates Windows Server 2003, do not change the setting of "Local security policy"
from the default.
The error occurs by InstallShield if the uninstallation is executed with the setting changed, and the
uninstallation fails.
NovaScale R620-LR / R620-MR Setup Guide
5-7