It is Gold Medal Products Company’s recommendation that this machine be plugged directly into a wall outlet. The use of extension cords is not recommended due to safety risks1 and the popper’s performance will be sacrificed/reduced.
Sno-King Machine Operation Ice Requirements The Midori Sno-King can use small or medium ice cubes approximately 2 to 3 inches in size. NOTE: The ice will not enter the shaving chute if the pieces are too large. Operating the Sno-King 1.
Page 5
Sno-King Installing New Shaving Blades Inspect your equipment before replacing the blades. With the POWER switch OFF and the machine unplugged, use a flashlight to examine the blades in the shaver body. If the blades appear to be nicked or bent, then the blades should be replaced. Follow this procedure: 1.
3. Please include the machine’s model name, serial number, and date of manufacture (located on the machine nameplate) with your order. 4. Address all parts orders to: Parts Department Gold Medal Products Co. 10700 Medallion Drive Cincinnati, Ohio 45241-4807 (800) 543-0862...
Page 8
Sno-King #1888W ASSEMBLY Motor p/n 12456 Fan Grate p/n 74746 Front Panel p/n 12698GSP Drain Fitting p/n 12668 Lead-In Cord p/n 22038 Midori Rack Side Panel p/n 67921 p/n 12648G All Models #1888...
Sno-King WARRANTY WE WARRANT to the original purchaser the Gold Medal equipment sold by us to be free from defects in material or workmanship under normal use and service. Our obligation under this warranty shall be limited to the repair or replacement of any...
Need help?
Do you have a question about the Midori Sno-King 1888W and is the answer not in the manual?
Questions and answers