Inserting An S50N Psu Into The Eps - Dell Force10 S50N Series Installing Manual

continue, as above.
red.
Figure 5-12. EPS Rear-Mounted (shown fully populated with PSUs)
Insert a PSU into a bay of the PSE so that the captive screws align with the screw holes in the PSE,
3
and then tighten the screws.
Figure 5-13. EPS Front-Mounted (shown below an S50)

Inserting an S50N PSU into the EPS

The Power Supply Unit (PSU) that supports both the S50 and S50N is an optional, external AC/DC
rectifier that provides 180W DC at 48V.
36 | Installing Backup Power
Figure 5-12 on page 36 shows the typically-used screw hole locations circled in