Four-Post Rack-Mounting With Cage Nuts - Dell Force10 S50N Series Installing Manual

Step Task
Set the adjustable rear mounting bracket to the length (one of three lengths) for your bracket. Secure the length
3
with the four screws.
Figure 4-2. Four-post Rack-mounting with Adjustable Rear-mounting Brackets

Four-Post Rack-mounting with Cage Nuts

Ensure that there is adequate clearance surrounding the cabinet or rack to permit access and airflow. If
you are installing two S-Series systems side-by-side, position them at least 5 inches (12.7 cm) apart.
Follow the steps below to install the unit into a four-post rack mounting with cage nuts.
Step Task
Attach the two rear brackets to the side panels. Align the three holes in the bracket with the three holes on the
1
chassis, and secure the brackets to the chassis using the screws.
Align and secure the adjustable bracket onto the rear bracket.
2
Top View of Brackets
Align brackets
Installing the Switch | 21