Part Names And Functions; Specifications - Korg Nu:tekt OD-KIT Owner's Manual

Part Names and Functions

OUTPUT
1
2
1. VOLUME knob: Adjusts the overall volume.
2. TONE knob: Turn this knob clockwise for a sharper sound, and
counter-clockwise for a more full-bodied sound.
3. SHAPE knob: By changing the anode resistance value of the Nutube, the
distortion waveform will change, letting you enjoy harmonic and distortion
changes.
Tip: With a DISTORTION circuit, it may seem that the volume is decreasing
when you turn the SHAPE knob to the right. However, this is a normal
characteristic of the TONE circuit.
4. GAIN knob: Used to adjust the amount of distortion.
Tip: Flipping the slide switch on the main circuit board to Double will give
you a two-series circuit, adding gain and volume.
5. EFFECT ON/OFF switch: Switches the effector on/off.
6. EFFECT ON/OFF LED: The indicator lights when the effector is on.
DC9V INPUT

Specifications

· Vacuum tube: Nutube 6P1
· Connectors and jacks: INPUT jack (monaural phone jack), OUTPUT jack
(monaural phone jack), DC 9V jack (
· Power: 9V alkaline battery (6LF22/6LR61) (sold separately), or DC 9V
AC adapter (sold separately)
· Battery life: Approx. 18 hr. (in Single mode, using an alkaline battery);
approx. 10 hr. (in Double mode, using an alkaline battery)
4
· Current consumption: 28 mA (Single), 46 mA (Double)
· Dimensions (W x D x H): 120 x 96 x 55 mm /4.72" x 3.78" x 2.17"
3
· Weight: 340 g / 12 oz.(without batteries)
· Included items: Owner's Manual
· Optional accessories: KORG AC adapter KA181 (DC 9V
5
* Specifications and appearance are subject to change without notice
6
for improvement.
- 6 -
)
)