Installing The Slimscsi 1450 - Adaptec SlimSCSI 1450 User Manual

SlimSCSI 1450 Adapter User's Guide

Installing the SlimSCSI 1450

Follow these steps to install the SlimSCSI 1450 and connect your
SCSI devices to it:
1
Remove the SlimSCSI 1450 from its packaging.
2
Plug the 50-pin connector into the first (or only) SCSI device, as
shown below. Make sure the SCSI device is not powered.
SCSI Connector
If the SCSI device has a DB25 (25-pin) connector, attach the
50-pin-to-DB25 converter, as shown below, and plug it into the
connector on the device.
2
Terminator
50-pin-to-25-pin
Converter
SCSI Device